Storage Daemon - Bacula Error and Event Code List

Storage Daemon Codes

SS0001: Authentication failed.
SD0001: Storage daemon startup event.
SD0002: Storage daemon device initialization event.
SJ0001: Storage Daemon Start of Job event.
SJ0002: Storage Daemon End of a Job event.
SD0003: Storage daemon device shutdown event.
SJ0003: Mark volume as immutable or read-only event.
SE0009: The Storage Daemon cannot connect to a remote resource. Check that the remote service is started and can be reached via the network.
SW0017: Incorrect configuration, such as incorrect Maximum Block Size on a Device.
SE0017: Incorrect configuration error, such as a miss-configuration of the device.
SF0017: Incorrect configuration fatal error, such as invalid device type.
SA0017: Incorrect configuration fatal error, such as Plugin Directory not defined.
SA0020: Unable to initialize kernel objects such as mutex, conditional variable.
SE0029: The Storage Daemon cannot connect to a remote FileDaemon resource. Check that the remote FileDaemon is started and can be reached via the network.
SF0031: Protocol error between component. This error cannot be recovered. Check the version and the TLS settings of each components.
SA0038: Incorrect dynamic object.
SE0038: Lookup of symbol “BaculaSDdriver” in driver for device failed.
SE0039: The Storage Daemon cannot connect to a remote Storage resource. Check that the remote Storage Daemon is started and can be reached via the network.
SE0060: Network connection error. Unable to resolve hostname via gethostbyname.
SE0061: Network connection error. Socket open error. Check the TCP/IP configuration.
SE0062: Unable to find the source address to connect a remote host. Check that the interface set as source exists on the system.
SE0063: Network socket configuration error. Check the TCP/IP configuration.
SW0063: Unable to set socket option such as SO_KEEPALIVE or SO_KEEPIDLE on the socket.
SE0064: TLS Error detected. The connect/accept operation cannot be done, or the password is incorrect.
SE0065: Authentication error. Password or resource name mismatch between the two components.
SF0065: Director Authentication error. Check the password on both Storage and Director side.
SE0066: TLS initialization error.
SE0067: TLS Negotiation failed. Check the version and the TLS settings of each components.
SE0068: TLS certificate verification error.
SE0069: TLS configuration error.
SE0071: Unable to start TLS protocol. Check the version and the TLS settings of each components.
SE0072: TLS shutdown error.
SW0106: Incorrect device configuration.
SW0108: Incorrect changer configuration.
SA0201: Write block error.
SE0201: Write error on device.
SF0201: Write error on device. Usually found after SE0201 errors.
SW0201: Free space caused end of the volume.
SE0202: Block buffer size looping problem.
SF0202: Error writing final JobMedia record.
SI0202: End of volume message.
SE0203: Volume label error.
SF0203: Write/read error on disabled device.
SE0204: Read error on device.
SF0204: Write error on device at EOM.
SE0205: Short block found on device, block discarded.
SF0205: Attempt to write on read-only volume.
SE0206: Invalid block length found.
SF0206: Attemp to write/read on closed device.
SE0207: Invalide block length found for tape device.
SF0207: Seek error on adata volume.
SE0208: Volume data error after a short block. block discarded.
SF3993: Error loading encryption key to LABEL, WRITE or READ a volume.